Industrial Redundant 500W+500W 2U Auto Ranging Power Supply
Features Maximum Power Output: 500W Frequency: 50 - 60Hz. Input Current: 10A for 115VAC, 5A for 230VAC. Inrush Current: 25A for 115VAC, 50A for 230VAC. The mum efficiency of the power supply is 80% at full load and 1150Vac/60HZ input. The mum power factor at full load shall be 0.98 / 115V 60Hz and 0.96 / 230V 50 Hz.Safety Approval: Meet CE Rohs 2.0 2011/65/EU, Meet REACH Operation Temp.: 0°C~40°C High Efficiency: 80% Reliability MTBF : Using MIL - HDBK -217F the calculated MTBF>100,000 hours at 25℃.
Introduction Industrial Redundant 2U ATX Auto Ranging Power Supply suitable for Desktop & Rack Mount Chassis solutions. The Input power is Auto ranging from 100~240 VAC providing up to 500W of power to DC solutions.
Specification Efficiency The minimum efficiency shall be 80% with full load and 115Vac/60Hz. Hold-Up Time The output voltages stay in regulation at least 18ms with 70% load after loss of AC input PROTECTIONS Over Current Protection Over Voltage Protection Short Circuit Protection Over Temperature Protection MTBF (Electronics) 100,000 hours at full load and 25oC ambient temperature MTBF (Fan) 40,000 hours at 40oC EMI FCC part 15, Subpart B, Class B EN55022 CISPR22 Class B Remote ON/OFF Control When PS-ON is pull to TTL low, the DC output is to be enabled. When PS-OFF is pull to TTL high the DC output is to be disabled RoHS Compliant COOLING Two 40mm DC FANS Mechanical & Environment Operating Temperature 0o~50oC Storage Temperature -20o~70oC Relative Humidity 5~90%, non-condensing 20% to 90%, non-condensing Altitude Altitude during operation: Up to 5000m Reliability MTBF Using MIL - HDBK -217F the calculated MTBF>100,000 hours at 25℃. Cooling By ball bearing DC fan. Dimensions 265x101x84(mm) Compliance/ Approval EN-61000-3-2 CLASS D (Active PFC), UL60950, CAN/CSA22.2 No.60950
Ordering Information R2A-500G1V2 Industrial Redundant 500W+500W 2U Auto Ranging Power Supply